• Developed export
    around the world
  • Responsible approach
    the environment
  • Strong in strategic research and development
  • European manufacturer of specialty chemicals
  • The long tradition
    on the market since 1920
You can search name, CAS, EINECS

Industrial nitrocellulose type E

Nitrocellulose type E with nitrogent content 11,8-12,3 % is characteristic with good solubility in ester-type solvents (up to 100 %) and limited solubility in ethyl alcohol (4 – 20 %). It forms hard films with good mechanical properties.

 

Most frequently produced viscosity types:

Product: NITROCELLULOSE TYPE E wetted with 30 or 35% Ethyl Alcohol or Butyl Alcohol or Isopropyl Alcohol
Viscosity type:   E 34 E 33 E 32 E 31 E 30 E 27 E 24 E 23 E 21 E 15 E 12 E 9 E 7 E 6 E 4
Property / Characteristic Unit Limit of Range
Raw material
Nitrogen content
- Wood pulp or Linters
11.8 - 12.3
Viscosity: - -
- conc. of NC in 95% acetone solution % 34 33 32 31 30 27 24 23 21 15 12 9 7 6 4
- viscosity value mPa.s 350 - 450
Colority of NC solution - -
- conc. of NC in BAC/Toluene (1:1) % 15                  10        
- colourity value mg l / 100 ml 2 max.
 Wetting agent content  %                              
 Content of insolubles (in BAC:EAC:Xylene = 1:2:2)  %  0.20 max                  0.80 max.          
 Bergmann-Junk stability test at 132ºC  ml NO/g  2.5 max.
 Water content  %  5.0 max. (for IPA 4.0 max.)

An adjustment of some parameters or an addition of new parameters is possible.

Available wetting agents: Ethanol, Isopropanol, Butanol, water – 30 or 35%

 

Technical data sheets (TDS) in pdf format can be downloaded after registration.

 

 
 

Comparison chart of industrial nitrocellulose type E

srovnavaci-ncl-e-ENG
Contact
fotografie Vlasta Mádrová
Vlasta Mádrová
sales manager
Tel.: +420 466 825 491
News
08/01/2019  |  Nitrocellulose
Synthesia at the fair Arab Health 2019
31/12/2018  |  Synthesia
Happy New Year 2019
24/09/2018  |  Synthesia
Synthesia at the fair Medica 2018